All top sellers
  • Pay Pal, MasterCard, Visa, American Express, Discover

    Pay Pal, MasterCard, Visa, American Express, Discover
UBLOX ZED-F9P RTK GNSS receiver board with SMA Base or Rover
  • UBLOX ZED-F9P RTK GNSS receiver board with SMA Base or Rover
  • UBLOX ZED-F9P RTK GNSS receiver board with SMA Base or Rover
  • UBLOX ZED-F9P RTK GNSS receiver board with SMA Base or Rover
  • EAN-4751046550986 (ZED-F9H high precision GNSS module for heading applications with SMA and USB)

ZED-F9H high precision GNSS module for heading applications: SMA, USB

ELT0098

ZED-F9H high precision GNSS module for heading applications with SMA and USB

VOLUME SALES PRICING

This product comes with 1 years worldwide warranty

194.99 €
Tax excluded
Quantity

100% secure payments
Total Rating Total Rating:

0 1 2 3 4
0/5 - 0 reviews

View ratings
0 1 2 3 4 0
0 1 2 3 0 0
0 1 2 0 1 0
0 1 0 1 2 0
0 0 1 2 3 0

  Add Review View Reviews View Reviews
  Security policy

Security policy

  Delivery policy

Delivery policy

  Return policy

Return policy

Description

ZED-F9H High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.

NEW USB type C Pin to Pin compatible version available ELT0398

The ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.
As the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.
ZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.

ZED-F9H breakout board features:

  • On-board low noise 3.3V voltage regulator with noise 2nV/Hz
  • USB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces
  • SMA edge antenna connectors
  • u-center ublox Evaluation Software
  • Extensive visualization and evaluation features
  • Time pulse LED, GEO LED, RTK LED
  • Backup supercapacitor
  • Dimensions: 38x22 mm without SMA
  • Weight: 9 gr.
  • Fully assembled and ready to use
  • 14 Holes with pitch 2.54mm 

ZED-F9H Features:

Receiver type:

  • 184-channel u-blox F9 engine
  • GPS L1C/A L2C, GLO L1OF L2OF
  • QZSS L1C/A L2C

Heading update rate:</strong

  • Up to 10 Hz

Heading accuracy:

  • <0.4 degrees

Position accuracy:

  • RTK 0.01 m + 1 ppm CEP

Convergence time:

  • RTK < 10 sec
  • Acquisition Cold starts 24 s
  • Aided starts 2 s
  • Reacquisition 2 s

Sensitivity:

  • Tracking & Nav –167
  • Cold starts –148 dBm
  • Hot starts –157 dBm
  • Reacquisition –160 dBm
  • AssistNow GNSS Online
  • OMA SUPL & 3GPP compliant
  • TCXO Oscillator
  • Built-In RTC crystal
  • Active CW detection and removal
  • Active and passive antennas Supported
  • Flash Memory

ZED-F9H Product Summary

ZED-F9H Data Sheet

ZED-F9H Integration Manual

ZED-F9H Interface Description

Product Details
ELT0098
4751046550986
ELT0098
131 Items
New
Accessories
5 other products in the same category:

Reviews Reviews (0)

Based on 0 reviews - 0 1 2 3 4 0/5
Filter:
0 1 2 3 4 (0)
0 1 2 3 0 (0)
0 1 2 0 1 (0)
0 1 0 1 2 (0)
0 0 1 2 3 (0)